Today was a busy day. We first removed all of the protective coating on the inside of the elevator skins and used the soldering iron to cut away the coating around the holes. Next we manufactured the stiffeners and prepped the edges. We then clecoed them to the skins and match drilled them to the skins. We deburred all the holes and dimpled the stiffners. Finally we started dimpling the skins.
The elevator skins laid out prior to starting the day's work.
One of the skins, and some of the stiffeners.
A close up of some of the "mantufactured" stiffeners.
Darren cutting out one of the stiffeners.
Scott cleaning up the edges on one of the skins.
Darren match drilling one of the skins.
Scott taking a turn match drilling out one of the skins.
A little team work on the dimpling of the stiffeners.
A closeup of some of our dimpling work on one of the skins.
Scott recording the day's evens in out log book, and one of the skins in the state we left it in.
No comments:
Post a Comment